Completely new design possibilities thanks to the lightweight construction and the door running at façade level
More freedom of movement and safety in narrow entrance areas - such as directly adjacent footpaths
When building the doors, we focus entirely on your ideas so that you can perfectly match all surfaces and colours of door panels or door coverings to your building. We also offer numerous examples of tried and tested solutions. The choice is yours.
The following sample door panels are available as standard in E6/EV1 anodised finish (sash profile / cover plate). Beaded sheet coverings are galvanised as standard. Of course, all profiles, infills and coverings can be coated in all RAL, DB and other special colours.
Käuferle offers an all-round door service for the maintenance and repair of collective garage doors throughout Germany. With specially trained specialists and original spare parts. So that your door always runs smoothly.
Due to defined exceptions in the standards and guidelines, an emergency stop command device is not mandatory for our door systems, which of course comply with the latest state of the art.
low-noise ceiling hoist drive, 230 volts: with toothed belt and adjustable push rod, soft start and soft stop, electronic power cut-off and integrated radio receiver - including securing of the main closing edges by opto-sensor strip as well as optional emergency stop button near the door.
Low-noise and robust ceiling hoist drive, 230 volts: with frequency converter, transverse steel roller chain, soft start and soft stop - including protection of the main and secondary closing edges by opto-sensor strip as well as optional emergency stop button near the door.
Convenient opening of the gates with the help of a radio module that reacts to light horn signals from exiting vehicles.
Pulse generator from loop detector and –cable, protection class IP 65. fahrbahnintegrated Loop gives at ÜBerfahrt den contact with the ToröOpen. Closing takes place automatically after the set time phase has elapsed.
serves to safeguard the gate wing swing range and has been required for power-operated gate systems in automatic mode since DIN EN 13 241 came into force.
Doors can be integrated into the door leaf as wicket doors or placed next to the door as a side door.
Doors can also be equipped with concealed hinges so that they can be integrated into the door leaf almost invisibly from the outside.
For a perfect design interplay between the door and the façade, we manufacture individual panels with a robust substructure made of aluminium profiles.
low-noise ceiling hoist drive, 230 volts: with toothed belt and adjustable push rod, soft start and soft stop, electronic power cut-off and integrated radio receiver - including securing of the main closing edges by opto-sensor strip as well as optional emergency stop button near the door.
Low-noise and robust ceiling hoist drive, 230 volts: with frequency converter, transverse steel roller chain, soft start and soft stop - including protection of the main and secondary closing edges by opto-sensor strip as well as optional emergency stop button near the door.
Key switch consisting of aluminium housing and built-in key switch with aluminium cover plate, pre-prepared for profile cylinder (half cylinder 10/30
Galvanised and powder-coated in DB 703, consisting of a hollow steel profile and built-in key switch with aluminium cover plate, prepared for profile cylinder (half cylinder 10/30) Foundation dimensions: 300 x 260 mm x frost depth
Pull switch with pull chain for gate operation on exit.
This allows the gate opening times to be freely programmed. After the selected and set time has elapsed, the gate closes automatically.
The pulse transmitter consists of a loop detector and loop cable, protection class IP 65. The loop laid in the roadway gives a contact to open the gate when a vehicle passes. Closing takes place automatically after the set time phase has elapsed.
The gate is operated via a flashing light signal.
It is used to secure the swing range of the gate wing and has been required for power-operated gate systems in automatic mode since DIN EN 12 435 came into force.
Käuferle offers the RV type with red advance warning phase as standard control for collective garages. Alternatively, the control type GV can be used on request for lanes with oncoming traffic. Both controls have been specially developed for the operation of door systems in collective garages.
A modern multi-channel system that is ideally suited for use in larger properties. Your hand transmitter is individually programmed for your door system before delivery and thus offers the highest possible security. The management software developed for this product allows us to program up to 2000 hand-held transmitters for your radio receiver.
Adjustable red pre-warning phase with automatic door closing. When a contact is triggered, the gate opening process is initiated and the red traffic lights light up on both sides. When the gate is completely open, the traffic lights go out. After a time phase has elapsed, the traffic lights switch to red again and after a short pre-warning time, the closing process of the gate begins. When the gate is closed, the traffic lights go out. All time intervals are programmable.
Two-way traffic control with automatic gate closing. By triggering a contact, the opening process of the gate is initiated and the red traffic lights are illuminated until the gate is fully open. Then the traffic lights are switched to green for one direction, allowing passage from that direction. After a time phase has elapsed, the traffic lights switch back to red and after a short delay time the gate begins to close. During the entire process, the traffic light of the opposite direction is switched to red. The lane is thus blocked. When the gate is closed, the traffic lights go out. All time intervals are programmable.
Wicket doors can be integrated into the door leaf or placed next to the door as a side door. Steel parts are optimally protected against corrosion by galvanising and in some cases additionally by coating, aluminium profiles by anodising or powder coating.
NewWicket doors can also be equipped with a concealed hinge and thus be integrated into the door leaf almost invisibly from the outside.
We will get back to you as soon as possible!
We will take care of your request immediately and get back to you as soon as possible.